LaserEngraverVerdicts
Specification comparison tool

Laser engraver work-area and power comparison

Wattage alone does not make two laser engravers comparable. Filter current machines by source family, minimum flat-work dimensions and listed speed, then compare architecture, expansion and verified source dates.

MachineSourceLaser powerWorking areaAreaMax listed speedExpansionVerifiedSource
xTool S1 20WBlue diode20W diode498 × 330 mm1,643 cm²*600 mm/s470 × 3000 mm with automatic conveyor feeder + rails2026-09-16Official source
xTool S1 40WBlue diode40W diode498 × 319 mm1,589 cm²*600 mm/s470 × 3000 mm with automatic conveyor feeder + rails2026-09-16Official source
xTool F1Diode + infrared10W diode + 2W infrared115 × 115 mm rounded rectangle132 cm²*4,000 mm/sPortable galvo workflow; no larger standard flat bed listed on compared source2026-09-16Official source
xTool F1 UltraDiode + fiber20W blue diode + 20W 1064 nm fiber220 × 220 mm484 cm²*10,000 mm/s220 × 500 mm with conveyor2026-09-16Official source
LaserPecker LP5Diode + fiber20W 450 nm diode + 20W 1064 nm fiber120 × 160 mm ellipse / 100 × 100 mm square192 cm²*10,000 mm/s160 × 300 mm with Slide Extension2026-09-16Official source
xTool P2CO₂55W CO₂ glass tube600 × 305 mm1,830 cm²*600 mm/sLarge enclosed CO₂ desktop workflow; check current accessories for pass-through/conveyor use2026-09-16Official source
AtomStack A24 ProBlue diode24W diode360 × 280 mm1,008 cm²*600 mm/s360 × 800 mm with conveyor2026-09-16Official source
SCULPFUN S30 Pro MaxBlue diode20W diode370 × 360 mm1,332 cm²*167 mm/sOfficial page lists expansion to 370 × 900 mm or 890 × 900 mm2026-09-16Official source
Creality Falcon A1 Pro 20W + 2W IRDiode + infrared20W diode + optional 2W 1064 nm IR358 × 268 mm959 cm²*600 mm/sClass 1 enclosed desktop system; IR module adds direct metal/plastic marking capability2026-09-16Official source
WeCreat Vision 20WBlue diode20W diode; optional 2W IR module420 × 290 mm1,218 cm²*600 mm/s378 × 3480 mm with automatic conveyor feeder; auto-lifting 0–140 mm2026-09-16Official source
ACMER P2 33WBlue diode33W diode400 × 400 mm1,600 cm²*500 mm/sOptional area extension kit; modular laser heads within P2 family2026-09-16Official source
LONGER Ray5 20WBlue diode20W diode400 × 365 mm1,460 cm²*167 mm/sOpen-frame platform with optional rotary, camera and extension accessories2026-09-16Official source

*Area is a simple width × depth comparison derived from listed dimensions. It can overstate usable area for rounded/elliptical zones. “Maximum speed” values are manufacturer-listed or directly converted from manufacturer-listed units where available; missing/non-comparable speed claims should not be treated as zero performance.

How to use the tool

Start with the laser source required by the material. Then set the minimum part dimensions you need to fit. Only after those constraints are satisfied should you compare power, speed, accessories and ownership cost.

Do not compare wattage across different laser sources as if it were one universal scale. A 20W fiber source solves different jobs from a 20W blue diode source, and a 55W CO₂ machine has a different material/workflow profile again.

Related: project-fit machine finder, material compatibility explorer, rotary compatibility database, and dataset methodology + downloads.