Source-checked database
Laser engraver rotary compatibility database
Rotary compatibility is more complicated than “supports tumblers.” This database separates the machine, exact rotary family, roller/chuck modes, riser requirements and manufacturer-documented size guidance.
| Machine | Rotary | Modes | Setup | Diameter guidance | Notes | Source |
|---|---|---|---|---|---|---|
| xTool F1 / F1 Lite | RA2 / RA2 Pro | RA2: roller; RA2 Pro: roller + chuck | No riser noted in current xTool guide | Roller guide: 3–50 mm (A), 45–60 mm (B), >60 mm (C) | Rotary sold separately. RA2 Pro can also handle spherical and irregular materials. | Official source |
| xTool S1 | RA2 / RA2 Pro | RA2: roller; RA2 Pro: roller + chuck | Riser base required | Roller guide: 3–50 mm (A), 45–60 mm (B), >60 mm (C) | xTool explicitly requires raising the S1 with the riser base before rotary use. | Official source |
| xTool F1 Ultra | RA2 / RA2 Pro | RA2: roller; RA2 Pro: roller + chuck | Rotary sold separately | Roller guide uses A/B/C levels; verify exact object geometry | Supports cylindrical materials; RA2 Pro also supports spherical and irregular materials. | Official source |
| xTool P2 / P2S | RA2 / RA2 Pro | Rotary processing for regular/irregular cylinders | Riser base recommended for wider material range | Without riser, xTool documents cylinders under 42 mm in one setup scenario | Use the current P2/P2S guide for the exact bed/riser configuration before buying accessories. | Official source |
| xTool M1 | RA2 / RA2 Pro | RA2: roller; RA2 Pro: roller + chuck | Risers required | Depends on riser orientation and rotary mode | xTool publishes separate circumference ranges for riser orientations and rotary modes. | Official source |
| xTool M1 Ultra | RA2 Pro | Roller + chuck | M1 Ultra riser base required | Depends on material and bed placement level | Rotary kit is sold separately except in certain bundles. | Official source |
| LaserPecker LP5 | LaserPecker Rotary Extension | Chuck-style rotary for cylindrical / irregular objects | Direct LP5 accessory support | LP5 support guide: 1–145 mm objects | LaserPecker also lists slide extension separately for larger flat working area. | Official source |
| LaserPecker LP4 | LaserPecker Rotary Extension | Chuck-style rotary | Compatible according to current accessory page | Accessory family supports multiple jaw configurations; verify exact object size | Current rotary manual applies to LP4 and LP5. | Official source |
| LaserPecker LX2 | LaserPecker Rotary Extension | Chuck-style rotary | Riser base required | Accessory family supports cylindrical objects; verify exact range for the LX2 setup | LaserPecker US store explicitly notes the LX2 requires a riser base with the rotary extension. | Official source |
Important: compatibility can depend on risers, cables, software version and the geometry of the object. Use this database to narrow the setup, then confirm the current manufacturer guide before purchasing an attachment.
Why this is useful for tumbler buyers
The rotary is part of the production system. A machine may support cylindrical work but require a riser, a particular connection cable, or a different chuck/roller mode for the object you sell. That changes setup time and total cost.
Also see our tumbler buying guide, ownership-cost calculator, and machine work-area and power comparison tool.